Highlights
The SpectrOil 100 Rotating Disc Electrode Optical Emission Spectrometer (RDE-OES) is a reliable and precise means of determining elemental composition in various fluids, including lubricating oil, coolant, light or heavy fuels, grease, and process water. It is widely used in commercial oil laboratories, on-site or trailer labs, and supports the Joint Oil Analysis Program (JOAP) calibration with results that correlate to those from the SpectrOil MNW, the only approved spectrometer for elemental analysis of lubricating oil for US and NATO military use.
The SpectrOil RDE-OES consists of three main components: an Excitation Source, an Optical System, and a Readout System. It uses a specific calibration program to eliminate the matrix effect, which enables switching from oil to fuel to coolant or water in just seconds.
- Provides precise and reliable results
- Simultaneous multi-element analysis
- Repeatable and sensitive fluid characterization
- Conforms to ASTM-D6595 (oil), and ASTM-D6728 (fuel)
- Fast and easy to operate
- No sample preparation required
- No solvents or gasses required
- Quick 30-second analysis time
- Minimal training/background required to operate
- Immediate results on-site
- Analysis at your facility
- Bench-top, transportable system
- Low cost per sample
Summary: The SpectrOil 100 Rotating Disc Electrode Optical Emission Spectrometer (RDE-OES) is a precise and reliable means of determining elemental composition in various fluids. It is widely used in commercial oil laboratories and on-site or trailer labs, and supports the Joint Oil Analysis Program (JOAP) calibration. The SpectrOil RDE-OES consists of an Excitation Source, an Optical System, and a Readout System, and uses a specific calibration program to eliminate the matrix effect, enabling quick switching from oil to fuel to coolant or water. It provides simultaneous multi-element analysis, repeatable and sensitive fluid characterization, and conforms to ASTM-D6595 (oil) and ASTM-D6728 (fuel). The SpectrOil RDE-OES is fast and easy to operate, with no sample preparation required, no solvents or gases required, and quick 30-second analysis time. It provides immediate results on-site, analysis at your facility, is a bench-top, transportable system, and has a low cost per sample.