Highlights
Maximum throughput and ease of use with very low sample and solvent consumption
The S-flow range of instruments consist of compact, bench-top automated viscometry systems for the analysis of Newtonian fluids. It complies fully with in ASTM D7279 and as such, has a direct correlation with ASTM D445. It is the ideal system for used oil analysis labs that need to test a wide range of lubricant viscosities. Quick analysis time, small sample size and low solvent consumption, combined with extreme ease of use and reliability make it the instrument of choice for many of our world-wide users.
The S-flow system is a self-contained viscometer system that consists of an accurately controlled thermostatic bath and a control touchscreen. Different models are available with either 1 or 2 baths, each of which contains 4 Houillon style tubes. Highly accurate optical sensors detect the flow of the sample through the viscometer tubes to obtain flow time results with 0.001 sec. precision. All measuring viscometer tubes function fully independently of each other allowing for very high throughput.
Additional parameters such as tube constants and cleaning cycle are also controlled by the operator. Only requiring 0.3 ml of sample, the system performs the measurement very quickly, allowing a throughput of up to 80 tests per hour per bath. Options include dual solvent cleaning and integrated duplo testing which allows the operator to perform 2 flow time determinations with only 1 sample injection.
- Applicable for fuels, base oils, formulated oils, and petroleum products as well as water-based fluids.
- Compliant with requirements for ASTM D7279, ASTM 2270 and correlation to ASTM D445.
- High throughput: up to 80 samples per hour per bath under ideal operation conditions.
- Very easy to use and maintain.
- Small sample volume: 0.3-1.0 ml.
- Low solvent consumption: 2-3 ml per sample.
- Extremely accurate temperature control and flow-time measurement independent of fluid type.
- Automatic flow time measurement with ultraprecise meniscus detection.
- Fully automatic cleaning and drying (model dependent).
- Fast & easy tube replacement (tubes are not connected to optical sensors).
- No need to drain bath during tube replacement.
- Single or dual solvent injection (model dependent).
- Integrated VI calculations (on 3500 model only).
- Stand-alone unit. No PC required. Software operation is available as an option.
- Chemically resistant to allow for all common solvents.
- Optional duplo measurement capability.
- Integrated back flushing.