Elemental Analysis Instruments

Elemental Analysis Instruments are essential tools for a variety of industries, including environmental, pharmaceutical, chemical, and food analysis. These instruments are used to determine the elemental composition of a sample, including the presence of trace elements.

Our Range of Elemental Analysis Instruments

SpectrOil 120 Series - (RDE-OES) Elemental Analyzer

The SpectrOil 100 Rotating Disc Electrode Optical Emission Spectrometer (RDE-OES) is a reliable and precise means of determining elemental composition in various fluids, including lubricating oil, coolant, light or heavy fuels, grease, and process water. It is widely used in commercial oil laboratories, on-site or trailer labs, and supports the Joint Oil Analysis Program (JOAP) calibration with results that correlate to those from the SpectrOil MNW, the only approved spectrometer for elemental analysis of lubricating oil for US and NATO military use. The SpectrOil RDE-OES consists of three main components: an Excitation Source, an Optical System, and a Readout System. It uses a specific calibration program to eliminate the matrix effect, which enables switching from oil to fuel to coolant or water in just seconds.

SpectrOil M Series

The SpectrOil 100 Series

The SpectrOil 100 Series is a compact, rugged, and transportable optical spectrometer for elemental analysis in oil and fuel. Meets military shock and vibration and environmental test standards, making it ideal for remote locations. Requires no sample preparation and has a 30-second analysis time. Features a specific calibration program that eliminates the matrix effect for compliance with ASTM standards. Switching from oil to fuel to coolant or water only takes seconds, not hours like ICP and other instruments. RDE-OES consists of an excitation source, optical system, and readout system for accurate and sensitive measurements. Self-sustained with built-in industrial touch panel PC and requires only AC power. Sub ppm LOD for most critical elements and less than 100 ppb LOD for V and alkali metals for SpectrOil M/F-LD. Compliant to ASTM D6728.

SpectrOil M: JOAP Certified Elemental Analyzer

Rapid Oil Analysis with AMETEK Spectro Scientific

The AMETEK Spectro Scientific oil analysis spectrometer is a compact, rugged, and transportable tool for rapidly analyzing in-service oils for wear metals, contaminants, and additives. It is the only approved oil analysis spectrometer in the US Department of Defense Joint Oil Analysis Program, and it is the industry standard for the Air Force, Navy, Army, and Marines.

The spectrometer uses the rotating disc electrode technique to measure quantities of dissolved and suspended fine particles in natural or synthetic petroleum-based products and coolants. It has a 30-second analysis time and can analyze up to 31 elements simultaneously. It does not require special training or utilities and is compliant with ASTM standards. The spectrometer has specific calibration programs for different fluids and is manufactured by AMETEK Spectro Scientific.

SpectrOil M - SpectrOil M/F-W Fuel Analyzer

In-Line Fuel Analysis with LIBS Technology

This tool is used for in-line analysis of fuel for large diesel engines on board ships and power plants. It measures the concentration of wear metals, contaminants, and additives in fuel. The tool uses laser-induced breakdown spectroscopy (LIBS) technology for fast and accurate analysis. It is compact, lightweight, and easy to install, and it is self-contained with no need for external cooling or vacuum systems. It provides results in less than 60 seconds and has a wide range of elements it can detect. It is compliant to ASTM D8150.